F. Kenneth Milne

Frank Kenneth Milne
Born(1885-07-18)18 July 1885
Died3 October 1980(1980-10-03) (aged 95)
Adelaide, South Australia
OccupationArchitect
SpouseHazel Muir Fotheringham
ChildrenLance Milne
PracticeF. Kenneth Milne & Evans
F. Kenneth Milne, Evans & Russell
F. Kenneth Milne, Dawkins & Boehm
Others
BuildingsSouth Australian Brewing Co.
Woodards House
Arbury Park (later Raywood)
Sunnyside, North Adelaide, his own residence
Ozone Marryatville remodelling

Frank Kenneth Milne (18 July 1885 – 3 October 1980), usually referred to as F. Kenneth Milne, was an Australian architect based in Adelaide, South Australia. He was regarded as one of the leading architects in the state in 1920, and continued to design buildings even in retirement. He went into partnership with a series of other architects over the course of his career, including John Richard Schomburgk Evans,[a] Charles Alexander Russell, and Rolfe Vernon Boehm. He is also known for his work as a cinema architect, having been the appointed architect for Ozone Theatres in the 1930s.

He and his wife established the Kenneth and Hazel Milne Travelling Scholarship at the University of Adelaide in 1958. Several of his designs survive today, with many heritage-listed, including Woodards House in Waymouth Street, Adelaide, the remodelled Regal Theatre in Kensington Park, and his own home in Stanley Street, North Adelaide.

  1. ^ "Death of Mr J. R. S. Evans". The Advertiser (Adelaide). Vol. 90, no. 27994. South Australia. 28 June 1948. p. 2. Retrieved 22 April 2024 – via National Library of Australia.
  2. ^ "Family Notices". South Australian Register. Vol. LVI, no. 13, 856. South Australia. 11 April 1891. p. 4. Retrieved 22 April 2024 – via National Library of Australia.
  3. ^ "Army records NAA: B2455, Evans J R S". National Archives of Australia. Retrieved 22 April 2024.


Cite error: There are <ref group=lower-alpha> tags or {{efn}} templates on this page, but the references will not show without a {{reflist|group=lower-alpha}} template or {{notelist}} template (see the help page).