Gutta

Labelled image of the Doric order entablature

A gutta (Latin pl. guttae, "drops") is a small water-repelling, cone-shaped projection used near the top of the architrave of the Doric order in classical architecture. At the top of the architrave blocks, a row of six guttae below the narrow projection of the taenia (fillet) formed an element called a regula. A regula was aligned under each triglyph of the Doric frieze. In addition, the underside of the projecting geison above the frieze had rectangular protrusions termed mutules that each had three rows of six guttae. These mutules were aligned above each triglyph and each metope.[1]

It is thought that the guttae were a skeuomorphic representation of the pegs used in the construction of the wooden structures that preceded the familiar Greek architecture in stone.[2] However, they have some functionality, as water drips over the edges, away from the edge of the building.[3]

  1. ^ Summerson, 13–14, 126
  2. ^ Chisholm, Hugh, ed. (1911). "Gutta" . Encyclopædia Britannica. Vol. 12 (11th ed.). Cambridge University Press. p. 743.
  3. ^ Summerson, 13–14