| High Capacity Metro Train | |
|---|---|
.jpg) | |
 Interior of HCMT in service, showing PIDs and seating | |
| In service | 2020–present |
| Manufacturer | Evolution Rail (Downer Rail, CRRC Changchun and Plenary Group) |
| Assembly | Newport Workshops |
| Built at | Changchun, China (bodyshells) |
| Replaced | Comeng (projected) |
| Constructed | 2018-2024 |
| Entered service | 27 December 2020 |
| Number built | 70[1] |
| Number in service | 61 |
| Formation | 7-car sets Tc–DMp–Mp1–DT–Mp2–DMp–Tc |
| Fleet numbers | 01–70[1] |
| Capacity |
|
| Operators | Metro Trains Melbourne |
| Depots |
|
| Lines served |
|
| Specifications | |
| Train length | 160,196 mm (525 ft 6+15⁄16 in) |
| Car length |
|
| Width | 3.04 m (9 ft 11+11⁄16 in) |
| Height | 4,186 mm (13 ft 8+13⁄16 in) |
| Floor height | 1.17 m (3 ft 10 in) |
| Entry | Level |
| Doors | 6 per carriage, 3 per side |
| Maximum speed | 130 km/h (81 mph) |
| Weight | 316.9 t (311.9 long tons; 349.3 short tons) |
| Axle load |
|
| Traction system | Times Electric IGBT–VVVF[5] |
| Traction motors | ABB 3-phase AC induction motor[5] |
| Electric system(s) | 1,500 V DC (nominal) from overhead catenary |
| Current collector(s) | Pantograph |
| Safety system(s) | Arden-Anzac only: Bombardier CITYFLO 650 CBTC[6] |
| Coupling system | Dellner |
| Seating | 502[3] |
| Track gauge | 1,600 mm (5 ft 3 in) broad gauge |
The High Capacity Metro Train (HCMT) is a type of electric multiple unit (EMU) train for use by Metro Trains Melbourne on the Melbourne rail network. The first train set entered service on 27 December 2020 and will become the primary rolling stock used in the Metro Tunnel when it opens in 2025.
The HCMTs carry around 1,400 passengers in seven carriages, running on Melbourne's 1,500 V DC overhead catenary system, and are currently the most advanced trains in the Metro Trains fleet. A consortium of investors and rail companies are constructing the trains in China and Australia via a contract with the Victorian Government, in addition to upgrade works necessary for the operation of the trains.
The HCMTs currently run all services on the Cranbourne and Pakenham lines, alongside two morning test services on the Sunbury line.
- ^ a b High Capacity Metro Trains Archived 28 August 2021 at the Wayback Machine Vicsig
- ^ DEDJTR 2017, p. 9.
- ^ a b c "WTT Network Configuration: Metro Rolling Stock" (PDF). Metro Trains Document Portal. Archived from the original on 21 September 2022. Retrieved 10 February 2019.
- ^ "Melbourne Airport Rail Link construction to start 2022, trains to run to CBD every 10 minutes". ABC News. 21 November 2020. Archived from the original on 23 December 2020. Retrieved 23 December 2020.
- ^ a b "Suppliers on the High Capacity Metro Trains Project" (PDF). Department of Transport (Victoria). Archived (PDF) from the original on 27 November 2022. Retrieved 10 April 2022.
- ^ Barrow, Keith (19 April 2018). "Bombardier to maintain Melbourne Metro Tunnel signalling". International Railway Journal. Archived from the original on 19 November 2021. Retrieved 19 November 2021.