Jura water correction

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (June 2020) (Learn how and when to remove this message) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Jura water correction" – news · newspapers · books · scholar · JSTOR (June 2020) (Learn how and when to remove this message) This article's lead section may be too long. Please read the length guidelines and help move details into the article's body. (June 2020) (Learn how and when to remove this message)

The correction of the waters of the Swiss Jura consisted of a wide series of hydrological undertakings carried out in Switzerland in the region of the three lakes: Lake Morat connected to Lake Neuchatel by the Broye Canal, the latter connected to Lake Biel by the Thielle Canal, an area called the "Seeland”.^[1]

The correction has helped regulate the hydrology. It limits the risk of flooding, particularly in the areas covered by the Aare. It has also added vast areas of valuable agricultural land through the drying out and subsequent sanitization and improvement of the swamps which used to lie between these three lakes.^[2]

Many rivers have been corrected in Switzerland, for example the Rhône, which has undergone several adjustments between the 19th century and present day.^[3] However, the realignments in the Swiss Seeland are still the largest hydrological development in Switzerland.^[4]: 105

At the foot of the Jura Mountains the region of the three lakes (Swiss Seeland) is part of the Rhine watershed. Each river of the region flows into the Aare, which is a tributary of the Rhine.

Before the works started in 1868, the Aare did not flow into Lake Bienne, but divided into several branches after the city of Aarberg, to join the Thielle, which flows into and out of Lake Bienne, near Büren an der Aare. Depending on weather and water conditions, the alluvial deposits and debris carried by the current would form banks damming the course of the Aare, resulting in rising waters upstream and unavoidable flooding, affecting the economic health of the whole area.

The area affected by the correction extends for about 100 km between La Sarraz and Luterbach, currently impacting the cantons of Vaud, Fribourg, Neuchatel, Solothurn, Berne and Jura.^[5]