Kontakt-5

Kontakt-5 is a type of second-generation^[1] explosive reactive armour (ERA) originating in the Soviet Union. Due to the shortcomings of Kontakt-1, NII Stali developed a new type of reactive armor, Kontakt-5, so that it also affects the penetration characteristics of APFSDS projectiles, unlike Kontakt-1. In addition, Kontakt-5 is not just additional armor, but is clearly integrated into the vehicle hull. The Kontakt-5 modules have a significantly thicker steel upper side. Depending on the module, they contain one or two 4S22 reactive elements. The explosive of a 4S22 element has the TNT equivalent of 330 g. It is sensitive enough to be activated by impacts from armor-piercing projectiles as well as shaped charge warheads. Kontakt-5 produces a stronger defensive detonation than Kontakt-1 and the thicker steel flyer plate thrown at the APFSDS projectile breaks or bends it. The increase in defensive capability led to the development of more advanced APFSDS projectiles.

Kontakt-5 was first observed on a T-80U in 1985. Later, the T-72B, T-84 and T-90 tanks were also equipped with Kontakt-5. In addition, the T-55, T-62 and BMP-3 tank models can also be equipped or upgraded with Kontakt-5. According to the manufacturer, Kontakt-5 is the first type of reactive armor that effectively protects armored vehicles against tandem shaped charges.

Total mass of Kontakt-5 reactive armor: 2.8 - 3.0 t, Protective effect (RHA equivalent): against APFSDS: 200 - 250 mm, against shaped charges (HEAT): 600 mm,