Jorge Cepernic Dam | |
---|---|
Country | Argentina |
Location | Puerto Santa Cruz, Santa Cruz Province |
Coordinates | 50°11′31.76″S 70°7′14.64″W / 50.1921556°S 70.1207333°W |
Purpose | Power |
Status | Under construction |
Construction began | July 2015 |
Dam and spillways | |
Type of dam | Embankment, concrete-face rock-fill |
Impounds | Santa Cruz River |
Height | 43.5 m (143 ft) |
Length | 2,900 m (9,500 ft) |
Dam volume | 6,900,000 m3 (9,000,000 cu yd) |
Reservoir | |
Total capacity | 2,720,000,000 m3 (2,210,000 acre⋅ft) |
Surface area | 198 km2 (76 sq mi) |
Hydraulic head | 34.65 m (113.7 ft) |
Turbines | 5 x 120 MW Kaplan-type |
Installed capacity | 600 MW |
Annual generation | 1,866 GWh (estimate) |
The Jorge Cepernic Dam, formerly known as La Barrancosa Dam, is a concrete-face rock-fill dam being built on the Santa Cruz River about 115 km (71 mi) west of Puerto Santa Cruz in Santa Cruz Province, Argentina. It was renamed after the former governor of Santa Cruz Jorge Cepernic. A consortium led by China's Gezhouba Group was awarded the contract to build the Jorge Cepernic Dam and the Néstor Kirchner Dam upstream in August 2013. The consortium will also fund the construction. Both dams are expected to cost nearly US$4.8 billion.[1] The dam is being built by Eling Ingeniería, the successor of Electroingeniería of Osvaldo Acosta and Gerardo Ferreyra.[2] The primary purpose of the dam is hydroelectric power generation and its power station will have an installed capacity of 600 MW.[3]
In July 2015 machines arrived in Santa Cruz for the construction of the dams.[4]
In December 2023 construction was stopped awaiting funding from China.[5]