A locally testable code is a type of error-correcting code for which it can be determined if a string is a word in that code by looking at a small (frequently constant) number of bits of the string. In some situations, it is useful to know if the data is corrupted without decoding all of it so that appropriate action can be taken in response. For example, in communication, if the receiver encounters a corrupted code, it can request the data be re-sent, which could increase the accuracy of said data. Similarly, in data storage, these codes can allow for damaged data to be recovered and rewritten properly.
In contrast, locally decodable codes use a small number of bits of the codeword to probabilistically recover the original information. The fraction of errors determines how likely it is that the decoder correctly recovers the original bit; however, not all locally decodable codes are locally testable.[1]
Clearly, any valid codeword should be accepted as a codeword, but strings that are not codewords could be only one bit off, which would require many (certainly more than a constant number) probes. To account for this, testing failure is only defined if the string is off by at least a set fraction of its bits. This implies words of the code must be longer than the input strings by adding some redundancy.