MV Tacoma

MV Tacoma approaching Bainbridge
History
NameTacoma
OwnerWashington State Department of Transportation
OperatorWashington State Ferries
Port of registrySeattle, Washington
RouteSeattle–Bainbridge Island
BuilderTodd Pacific Shipyards, Seattle, Washington
Cost$80 million[1]
LaunchedAugust 29, 1996
AcquiredAugust 18, 1997
Maiden voyageOctober 17, 1997
In serviceOctober 17, 1997
Identification
StatusIn service
NotesOut of service between July 29, 2014 and March 27, 2015 due to catastrophic failure of electrical system.
General characteristics
Class and typeJumbo Mark-II-class auto/passenger ferry
Length460 ft 2 in (140.3 m)
Beam90 ft (27.4 m)
Draft17 ft 3 in (5.3 m)
Deck clearance15 ft 6 in (4.7 m)
Installed powerTotal 16,000 hp (12,000 kW) from 4 x EMD 16-710G Diesel-Electric engines
Speed18 knots (33 km/h; 21 mph)
Capacity
  • 2,500 passengers
  • 202 vehicles (max 60 commercial)

The MV Tacoma is a Jumbo Mark-II-class ferry operated by Washington State Ferries. Launched in 1997, it was the first in its class in the Washington State Ferries fleet. Since delivery, the Tacoma has almost exclusively been assigned to the busy Seattle–Bainbridge Island route.

The Tacoma and its sister ship, the MV Wenatchee, suffered from excessive vibration during their early period of operation, until it was repaired during routine maintenance in 1999. The issue was addressed in the final Jumbo Mark II ferry, the MV Puyallup, before it launched.[1]

  1. ^ a b Nalder, Eric (March 5, 1999). "Giant New Ferries Experience Bad Vibrations -- $52,000 Per Ship To Remove Shaking 'As Bad As The Old Kalakala'". The Seattle Times.