N scale

N scale
A Bachmann Industries N-scale model of a Chesapeake and Ohio Railway H-5 class 2-6-6-2 Mallet locomotive, shown alongside a pencil for size
Scale ratio
  • 1:148 (United Kingdom)
  • 1:150 (Japan)
  • 1:160 (elsewhere)
Model gauge9 mm (0.354 in)
Prototype gaugeStandard gauge

N scale is a popular model railway scale.[1] Depending upon the manufacturer (or country), the scale ranges from 1:148 to 1:160. Effectively the scale is 1:159, 9 mm to 1,435 mm (4 ft 8+12 in), which is the width of standard gauge railway. However the scale may vary to simulate wide or narrow gauge rail. In all cases, the gauge (the distance between the rails) is 9 mm or 0.354 in. The term N gauge refers to the track dimensions, but in the United Kingdom in particular British N gauge refers to a 1:148 scale with 1:160 (9 mm or 0.354 in) track gauge modelling. The terms N scale and N gauge are often inaccurately used interchangeably, as scale is defined as ratio or proportion of the model, and gauge only as a distance between rails. The scale 1:148 defines the rail-to-rail gauge equal to 9 mm exactly (at the cost of scale exactness), so when calculating the rail or track use 1:160 and for engines and car wheel base use 1:148.

All rails are spaced 9 mm apart but the height can differ. Rail height (in thousandths of an inch) is expressed as a "code": thus, Code 55 rails are 0.055 inches (1.4 mm) high while Code 80 rails have a height of 0.080 inches (2.0 mm).[2][3] Common real railroad rails are at least 6 inches (150 mm) tall and can be taller on some roads, so at true scale the rails would be about 0.040 inches (1.0 mm) high.[2] Many older N-scale models may not run well on Code 55 track as their flanges are often unrealistically large, causing the wheels to bounce along the ties instead of ride along the railhead. Wheelsets with these large flanges are colloquially known as 'pizza cutters' due to a resemblance to the kitchen utensil.[note 1]

An advantage of N scale is that it allows hobbyists to build layouts that take up less space than HO scale, or put longer track runs into the same amount of space, because the models are smaller (by nearly a half) than they are in HO scale (1:87).[5] While N scale is quite small, it is not the smallest commercially available scale, as Z scale is smaller yet at 1:220 and T scale is 1:450 or 1:480. N scale is considered generally compatible with 1:144 scale for miniature wargaming.

  1. ^ "NMRA Standards: S-1.2 Standards for Scale Models" (PDF). NMRA.org. National Model Railroad Association. July 2009. Retrieved 3 May 2020.
  2. ^ a b "NMRA Recommended Practices: RP-15.1 Rail" (PDF). NMRA.org. National Model Railroad Association. January 1990. Retrieved 3 May 2020.
  3. ^ "Model railroad track codes defined". Model Railroader. Kalmbach Publishing. 29 January 2010. Retrieved 3 May 2020.
  4. ^ Bardsley, Richard (2013). Making a Start in N Gauge Railway Modelling (e-book). Ramsbury, Wiltshire, UK: The Crowood Press, Ltd. p. n.p. ISBN 978-1-84797-650-5 – via Google Books.
  5. ^ "Scales & More: Modeling Scales". NMRA.org. National Model Railroad Association. 2 December 2014. Retrieved 3 May 2020.


Cite error: There are <ref group=note> tags on this page, but the references will not show without a {{reflist|group=note}} template (see the help page).