Nanocomposite

Part of a series of articles on
Nanomaterials
Carbon nanotubes
Fullerenes
Other nanoparticles
Nanostructured materials

Nanocomposite is a multiphase solid material where one of the phases has one, two or three dimensions of less than 100 nanometers (nm) or structures having nano-scale repeat distances between the different phases that make up the material.

In the broadest sense this definition can include porous media, colloids, gels and copolymers, but is more usually taken to mean the solid combination of a bulk matrix and nano-dimensional phase(s) differing in properties due to dissimilarities in structure and chemistry. The mechanical, electrical, thermal, optical, electrochemical, catalytic properties of the nanocomposite will differ markedly from that of the component materials. Size limits for these effects have been proposed:[1]

  1. <5 nm for catalytic activity
  2. <20 nm for making a hard magnetic material soft
  3. <50 nm for refractive index changes
  4. <100 nm for achieving superparamagnetism, mechanical strengthening or restricting matrix dislocation movement

Nanocomposites are found in nature, for example in the structure of the abalone shell and bone. The use of nanoparticle-rich materials long predates the understanding of the physical and chemical nature of these materials. Jose-Yacaman et al.[2] investigated the origin of the depth of colour and the resistance to acids and bio-corrosion of Maya blue paint, attributing it to a nanoparticle mechanism. From the mid-1950s nanoscale organo-clays have been used to control flow of polymer solutions (e.g. as paint viscosifiers) or the constitution of gels (e.g. as a thickening substance in cosmetics, keeping the preparations in homogeneous form). By the 1970s polymer/clay composites were the topic of textbooks,[3][4] although the term "nanocomposites" was not in common use.

In mechanical terms, nanocomposites differ from conventional composite materials due to the exceptionally high surface to volume ratio of the reinforcing phase and/or its exceptionally high aspect ratio. The reinforcing material can be made up of particles (e.g. minerals), sheets (e.g. exfoliated clay stacks) or fibres (e.g. carbon nanotubes or electrospun fibres).[5] The area of the interface between the matrix and reinforcement phase(s) is typically an order of magnitude greater than for conventional composite materials. The matrix material properties are significantly affected in the vicinity of the reinforcement. Ajayan et al.[6] note that with polymer nanocomposites, properties related to local chemistry, degree of thermoset cure, polymer chain mobility, polymer chain conformation, degree of polymer chain ordering or crystallinity can all vary significantly and continuously from the interface with the reinforcement into the bulk of the matrix.

This large amount of reinforcement surface area means that a relatively small amount of nanoscale reinforcement can have an observable effect on the macroscale properties of the composite. For example, adding carbon nanotubes improves the electrical and thermal conductivity. Other kinds of nanoparticulates may result in enhanced optical properties, dielectric properties, heat resistance or mechanical properties such as stiffness, strength and resistance to wear and damage. In general, the nano reinforcement is dispersed into the matrix during processing. The percentage by weight (called mass fraction) of the nanoparticulates introduced can remain very low (on the order of 0.5% to 5%) due to the low filler percolation threshold, especially for the most commonly used non-spherical, high aspect ratio fillers (e.g. nanometer-thin platelets, such as clays, or nanometer-diameter cylinders, such as carbon nanotubes). The orientation and arrangement of asymmetric nanoparticles, thermal property mismatch at the interface, interface density per unit volume of nanocomposite, and polydispersity of nanoparticles significantly affect the effective thermal conductivity of nanocomposites.[7]

  1. ^ Kamigaito, O (1991). "What can be improved by nanometer composites?". J. Jpn. Soc. Powder Powder Metall. 38 (3): 315–21. doi:10.2497/jjspm.38.315. in Kelly, A, Concise encyclopedia of composites materials, Elsevier Science Ltd, 1994
  2. ^ Jose-Yacaman, M.; Rendon, L.; Arenas, J.; Serra Puche, M. C. (1996). "Maya Blue Paint: An Ancient Nanostructured Material". Science. 273 (5272): 223–5. Bibcode:1996Sci...273..223J. doi:10.1126/science.273.5272.223. PMID 8662502. S2CID 34424830.
  3. ^ B.K.G. Theng "Formation and Properties of Clay Polymer Complexes", Elsevier, NY 1979; ISBN 978-0-444-41706-0
  4. ^ Functional Polymer Composites with Nanoclays, Editors: Yuri Lvov, Baochun Guo, Rawil F Fakhrullin, Royal Society of Chemistry, Cambridge 2017, https://pubs.rsc.org/en/content/ebook/978-1-78262-672-5
  5. ^ "What are Polymer Nanocomposites?". Coventive Composites. 2020-09-09.
  6. ^ P.M. Ajayan; L.S. Schadler; P.V. Braun (2003). Nanocomposite science and technology. Wiley. ISBN 978-3-527-30359-5.
  7. ^ Tian, Zhiting; Hu, Han; Sun, Ying (2013). "A molecular dynamics study of effective thermal conductivity in nanocomposites". Int. J. Heat Mass Transfer. 61: 577–582. Bibcode:2013IJHMT..61..577T. doi:10.1016/j.ijheatmasstransfer.2013.02.023.