Network switch

Avaya ERS 2550T-PWR, a 50-port Ethernet switch

A network switch (also called switching hub, bridging hub, Ethernet switch, and, by the IEEE, MAC bridge[1]) is networking hardware that connects devices on a computer network by using packet switching to receive and forward data to the destination device.

A network switch is a multiport network bridge that uses MAC addresses to forward data at the data link layer (layer 2) of the OSI model. Some switches can also forward data at the network layer (layer 3) by additionally incorporating routing functionality. Such switches are commonly known as layer-3 switches or multilayer switches.[2]

Switches for Ethernet are the most common form of network switch. The first MAC Bridge[3][4][5] was invented[6] in 1983 by Mark Kempf, an engineer in the Networking Advanced Development group of Digital Equipment Corporation. The first 2 port Bridge product (LANBridge 100) was introduced by that company shortly after. The company subsequently produced multi-port switches for both Ethernet and FDDI such as GigaSwitch. Digital decided to license its MAC Bridge patent in a royalty-free, non-discriminatory basis that allowed IEEE standardization. This permitted a number of other companies to produce multi-port switches, including Kalpana.[7] Ethernet was initially a shared-access medium, but the introduction of the MAC bridge began its transformation into its most-common point-to-point form without a collision domain. Switches also exist for other types of networks including Fibre Channel, Asynchronous Transfer Mode, and InfiniBand.

Unlike repeater hubs, which broadcast the same data out of each port and let the devices pick out the data addressed to them, a network switch learns the Ethernet addresses of connected devices and then only forwards data to the port connected to the device to which it is addressed.[8]

  1. ^ IEEE 802.1D
  2. ^ Thayumanavan Sridhar (September 1998). "Layer 2 and Layer 3 Switch Evolution". cisco.com. The Internet Protocol Journal. Cisco Systems. Retrieved 2014-08-05.
  3. ^ Stewart, Robert; Hawe, William; Kirby, Alan (April 1984). "Local Area Network Connection". Telecommunications.
  4. ^ W. Hawe, A. Kirby, A. Lauck, "An Architecture for Transparently Interconnecting IEEE 802 Local Area Networks", technical paper submitted to the IEEE 802 committee, document IEEE-802.85*1.96, San Diego CA, October 1984.
  5. ^ Hawe, William; Kirby, Alan; Stewart, Robert (1987). Advances in Local Area Networks. IEEE Press. pp. Chapter 28. ISBN 0-87942-217-3.
  6. ^ US 4597078, "Bridge circuit for interconnecting networks" 
  7. ^ Robert J. Kohlhepp (2000-10-02). "The 10 Most Important Products of the Decade". Network Computing. Archived from the original on 2010-01-05. Retrieved 2008-02-25.
  8. ^ "Hubs Versus Switches – Understand the Tradeoffs" (PDF). ccontrols.com. 2002. Retrieved 2013-12-10.