New South Wales 49 class locomotive

New South Wales 49 class
4916 at Thirlmere in May 2010
Type and origin
Power typeDiesel-electric
BuilderClyde Engineering, Granville
Serial number60-221 to 60-226
62-257 to 62-262
64-342 to 64-347
ModelEMD G8C
Build date1960–1964
Total produced18
Specifications
Configuration:
 • UICCo-Co
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Wheel diameter40 in (1,016 mm)
LengthOver headstocks:
46 ft 3 in (14.10 m),
Over coupler pulling faces:
50 ft 5 in (15.37 m)
Width9 ft 2 in (2.79 m)
Height13 ft 9 in (4.19 m)
Axle load13 long tons 6 cwt (29,800 lb or 13.5 t)
Loco weight80 long tons 0 cwt (179,200 lb or 81.3 t)
Fuel typeDiesel
Fuel capacity690 imp gal (3,100 L; 830 US gal)
Lubricant cap.108 imp gal (490 L; 130 US gal)
Coolant cap.133 imp gal (600 L; 160 US gal)
Sandbox cap.12 cu ft (0.34 m3)
Prime moverEMD 8-567C or 8-567CR
RPM range275–835
Engine typeTwo-stroke V8 diesel
AspirationRoots blower
GeneratorEMD D25
Traction motorsEMD D29, 6 of
Cylinders8
Cylinder size8.5 in × 10 in (216 mm × 254 mm)
Performance figures
Maximum speed77 mph (124 km/h)
Power outputGross:
950 hp (710 kW),
For traction:
875 hp (650 kW)
Tractive effortContinuous:
37,200 lbf (165.47 kN)
at 6.3 mph (10.1 km/h)
Career
OperatorsNSW Department of Railways
Number in class18
Numbers4901–4918
First run29 September 1960
Preserved4903, 4906, 4916, 4918
Disposition7 Operational, 5 Scrapped,
4 Preserved, 1 Stored, 1 Static

The 49 class are a class of diesel locomotives built by Clyde Engineering, Granville for the New South Wales Department of Railways between 1960 and 1964.