Nissan Z engine | |
---|---|
Overview | |
Manufacturer | Nissan (Nissan Machinery) |
Production | 1978–1989 |
Layout | |
Configuration | Inline-4 |
Displacement | 1.6 L (1,595 cc) 1.8 L (1,770 cc) 2.0 L (1,952 cc) 2.2 L (2,188 cc) 2.4 L (2,389 cc) |
Cylinder bore | 83 mm (3.27 in) 85 mm (3.35 in) 87 mm (3.43 in) 89 mm (3.50 in) |
Piston stroke | 73.7 mm (2.90 in) 78 mm (3.07 in) 86 mm (3.39 in) 92 mm (3.62 in) 96 mm (3.78 in) |
Cylinder block material | Cast iron |
Cylinder head material | Aluminum |
Valvetrain | SOHC 2 valves x cyl. |
Compression ratio | 8.3:1, 8.8:1 |
Combustion | |
Fuel system | Carburetor or Throttle-body FI |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | 95–135 PS (70–99 kW; 94–133 hp) |
Torque output | 132–196 N⋅m; 98–145 lbf⋅ft (13.5–20 kg⋅m) |
Chronology | |
Predecessor | Nissan L engine (4-cylinder) |
Successor | Nissan CA engine Nissan KA engine Nissan NA engine |
The Nissan Z engine is a series of automobile and light truck four-cylinder engines that was engineered by Nissan Machinery, manufactured by the Nissan Motor Company from 1979 through August 1989. All Z engines had 4 cylinders, a total of 8 valves and a single overhead camshaft (SOHC). Displacements ranged from 1.6 L to 2.4 L.The Z series' engine blocks were nearly identical to those of the earlier L Series with the exception of the Z24. While the Z16 and Z18 engines had a deck height similar to the earlier L13/L14/L16/L18 variants, the Z24 had a taller deck height to accommodate a longer stroke. The most notable difference between the Z-series engine and its predecessor was the introduction of a new crossflow cylinder head which reduced emissions by moving the intake ports to the right side of the engine opposite the exhaust ports. This change allows the exhaust port velocity to more effectively scavenge the cylinder and reduce reversion pulses to enhance induction. This change also limits maximum valve lift/lobe lift profiles rendering the cylinder head and valve train configuration undesirable for high-performance uses. The Z series evolved into the NA and KA engines which, along with the smaller CA series, replaced the Z series .[1]