The ferry in 2008
| |
History | |
---|---|
Name | Peninsula Princess[1] |
Operator | Peninsula Searoad Transport Pty Ltd |
Port of registry | Australia |
Builder | Stuart Ballantyne, ASD Marine Construction |
Laid down | Carrington Slipways, New South Wales, Australia |
Completed | 1987 |
Identification | IMO number: 8614481[2] |
Status | In Service |
General characteristics | |
Class and type | Single-ended, roll-on/roll-off |
Tonnage | 197 GT |
Length | 35.6 m (116.8 ft) |
Beam | 13.4 m (44.0 ft) |
Draft | 2.3 m (7.5 ft) |
Ramps |
|
Installed power |
|
Propulsion | Gearbox: Reintjes WAF 340 3.5:1 |
Speed |
|
Capacity |
|
Crew | Four in summer, three in winter |
Notes |
|
The Peninsula Princess is a single ended roll-on/roll-off vehicle ferry owned by Peninsula Searoad Transport of Victoria, Australia. It operated between the heads of Port Phillip Bay between the towns of Queenscliff and Sorrento from 1987[1] to 1993.[3] It was replaced by the MV Queenscliff.
In 2004 the ferry was sighted docked in the Tamar River in Launceston, Tasmania.[4] In July 2008 the Peninsula Princess was brought back into service on the Queenscliff – Sorrento route, when one of the larger ferries was in dry dock.
In 2009 the ferry temporarily operated the Bruny Island Ferry route, replacing the Mirambeena while it underwent maintenance.[5]
The ferry has operated the Queenscliff - Sorrento route when the MV Queenscliff underwent a refit and maintenance in mid-2011 [6] and again in July and August 2013.[7] The ferry was re introduced into service in December 2022 while the MV Queenscliff suffered mechanical problems which was sent to Geelong for engineering for an unknown duration.
The smaller ferry, the Peninsula Princess, will be replacing the MV Queenscliff from 4PM Tuesday the 16th of July through to the 23rd of August whilst it is in Dry Dock for an engine upgrade and routine maintenance.