Platinum print

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This lead section contains weasel words: vague phrasing that often accompanies biased or unverifiable information. Such statements should be clarified or removed. (April 2014) The neutrality of this article is disputed. Relevant discussion may be found on the talk page. Please do not remove this message until conditions to do so are met. (October 2016) (Learn how and when to remove this message) This article's factual accuracy is disputed. Relevant discussion may be found on the talk page. Please help to ensure that disputed statements are reliably sourced. (October 2016) (Learn how and when to remove this message) The article's lead section may need to be rewritten. Please help improve the lead and read the lead layout guide. (October 2016) (Learn how and when to remove this message) (Learn how and when to remove this message)

Alternative photography
Bleach bypass Bromoil process Cross processing Cyanotype Double exposure Gum bichromate Infrared Oil print process Pinhole Platinum process Polaroid art Redscale Sprocket hole Through the Viewfinder Toning Ultraviolet
v t e

Platinum prints, also called platinotypes, are photographic prints made by a monochrome printing process involving platinum.

Platinum tones range from warm black, to reddish brown, to expanded mid-tone grays^{[clarification needed]} that are unobtainable in silver prints.^{[1][dubious – discuss]}

Unlike the silver print process, platinum lies on the paper surface, while silver lies in a gelatin or albumen emulsion that coats the paper. As a result, since no gelatin emulsion is used, the final platinum image is absolutely matte with a deposit of platinum (and/or palladium, its sister element which is also used in most platinum photographs) absorbed slightly into the paper.^[2]

Platinum prints are the most durable of all photographic processes.^{[dubious – discuss]} The platinum group metals are very stable against chemical reactions that might degrade the print—even more stable than gold. It is estimated that a platinum image, properly made, can last thousands of years.^[2] Some of the desirable characteristics of a platinum print include:

• The reflective quality of the print is much more diffuse in nature compared to glossy prints that typically have specular reflections.
• A very delicate, large tonal range.
• Not being coated with gelatin, the prints do not exhibit the tendency to curl.
• The darkest possible tones in the prints are lighter than silver-based prints. Recent^[when?] studies^{[citation needed]} have attributed this to an optical illusion produced by the gelatin coating on Resin Coated and fiber-based papers. However, platinotypes that have been waxed or varnished will produce images that appear to have greater maximum density than silver prints.
• A decreased^[quantify] susceptibility to deterioration compared to silver-based prints due to the inherent stability of the process and also because they are commonly printed on 100% rag papers.

Many^[quantify] practitioners have abandoned platinum and only use palladium.^{[citation needed]} The process using palladium alone (sodium tetrachloropalladate) is similar to standard processes, but rather than using ferric oxalate plus potassium chlorate as the restrainer (which is ineffective for palladium), a weak solution of sodium chloroplatinate is used instead. Sodium chloroplatinate, in contrast to potassium chlorate, does not cause grain. This formula is generally referred to as the Na2 method. This somewhat misleading abbreviation was coined by Richard Sullivan of Bostick & Sullivan, one of the principal suppliers of chemistry and printing supplies, who popularized the process.