Point-to-Point Protocol over Ethernet

"PPPoE" redirects here. Not to be confused with PoE.
PPPoE and TCP/IP protocol stack
Application FTP SMTP HTTP ... DNS ...
Transport TCP UDP
Internet IP IPv6
Network access PPP
PPPoE
Ethernet

The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating Point-to-Point Protocol (PPP) frames inside Ethernet frames. It appeared in 1999, in the context of the boom of DSL as the solution for tunneling packets over the DSL connection to the ISP's IP network, and from there to the rest of the Internet. A 2005 networking book noted that "Most DSL providers use PPPoE, which provides authentication, encryption, and compression."[1] Typical use of PPPoE involves leveraging the PPP facilities for authenticating the user with a username and password, via the PAP protocol or via CHAP. PAP was dominant in 2007 but service providers have been transitioning to the more secure CHAP, because PAP is a plain-text protocol.[2] Around 2000, PPPoE was also starting to become a replacement method for talking to a modem connected to a computer or router over an Ethernet LAN displacing the older method, which had been USB. This use-case, connecting routers to modems over Ethernet is still extremely common today.

On the customer-premises equipment, PPPoE may be implemented either in a unified residential gateway device that handles both DSL modem and IP routing functions or in the case of a simple DSL modem (without routing support), PPPoE may be handled behind it on a separate Ethernet-only router or even directly on a user's computer. (Support for PPPoE is present in most operating systems, ranging from Windows XP,[3] Linux[4] to Mac OS X.[5]) More recently[when?], some GPON-based (instead of DSL-based) residential gateways also use PPPoE, although the status of PPPoE in the GPON standards is marginal though mentioned in ITU-T recommendation G.984.1 "Gigabit-capable passive optical networks (GPON): General characteristics".

PPPoE was developed by UUNET, Redback Networks (now Ericsson) and RouterWare (now Wind River Systems) [6] and is available as an informational RFC 2516.

In the world of DSL, PPP is commonly understood to be running on top of ATM (as PPPoA) with ATM as the underlying Layer 2 protocol and a version of DSL the Layer 1 protocol, although no such limitation exists in the PPP protocol itself.

Other usage scenarios are sometimes distinguished by tacking as a suffix another underlying protocol. For example, PPPoEoE, when the transport is Ethernet itself, as in the case of Metro Ethernet networks. (In this notation, the original use of PPPoE would be labeled PPPoEoA, although it should not be confused with PPPoA, which has a different encapsulation of the PPP protocol.)

PPPoE has been described in some books as a "layer 2.5" protocol,[2][7] in some rudimentary sense similar to MPLS because it can be used to distinguish different IP flows sharing an Ethernet infrastructure, although the lack of PPPoE switches making routing decisions based on PPPoE headers limits applicability in that respect.[7]

  1. ^ James Boney (2005). Cisco IOS in a Nutshell. O'Reilly Media, Inc. p. 88. ISBN 978-0-596-55311-1.
  2. ^ a b Philip Golden; Hervé Dedieu; Krista S. Jacobsen (2007). Implementation and Applications of DSL Technology. Taylor & Francis. p. 479. ISBN 978-1-4200-1307-8.
  3. ^ "How to create a PPPoE connection in Windows XP". Archived from the original on 3 December 2013. Retrieved 11 December 2013.
  4. ^ "Configuring Linux". www.tldp.org. Retrieved 26 March 2019.
  5. ^ "Connecting to the Internet with PPPoE (Mac OS X v10.5 and earlier)". Apple Support. Retrieved 26 March 2019.
  6. ^ Wind River Systems Acquires RouterWare, Inc.. Findarticles.com (1999-07-05). Retrieved on 2011-09-27. Archived 2005-05-26 at the Wayback Machine
  7. ^ a b Michael Beck (2005). Ethernet in the First Mile : The IEEE 802.3ah EFM Standard. McGraw Hill Professional. p. 27. ISBN 978-0-07-146991-3.