This article needs additional citations for verification. (March 2024) |
There are two types of radio network currently in use around the world: the one-to-many (simplex communication) broadcast network commonly used for public information and mass-media entertainment, and the two-way radio (duplex communication) type used more commonly for public safety and public services such as police, fire, taxicabs, and delivery services. Cell phones are able to send and receive simultaneously by using two different frequencies at the same time. Many of the same components and much of the same basic technology applies to all three.
The two-way type of radio network shares many of the same technologies and components as the broadcast-type radio network but is generally set up with fixed broadcast points (transmitters) with co-located receivers and mobile receivers/transmitters or transceivers. In this way both the fixed and mobile radio units can communicate with each other over broad geographic regions ranging in size from small single cities to entire states/provinces or countries. There are many ways in which multiple fixed transmit/receive sites can be interconnected to achieve the range of coverage required by the jurisdiction or authority implementing the system: conventional wireless links in numerous frequency bands, fibre-optic links, or microwave links. In all of these cases the signals are typically backhauled to a central switch of some type where the radio message is processed and resent (repeated) to all transmitter sites where it is required to be heard.
In contemporary two-way radio systems a concept called trunking is commonly used to achieve better efficiency of radio spectrum use and provide very wide-ranging coverage with no switching of channels required by the mobile radio user as it roams throughout the system coverage. Trunking of two-way radio is identical to the concept used for cellular phone systems where each fixed and mobile radio is specifically identified to the system controller and its operation is switched by the controller.