 Ranger 8 | |||||
| Mission type | Lunar impactor | ||||
|---|---|---|---|---|---|
| Operator | NASA | ||||
| COSPAR ID | 1965-010A | ||||
| SATCAT no. | 1086 | ||||
| Mission duration | 65 hours | ||||
| Spacecraft properties | |||||
| Manufacturer | Jet Propulsion Laboratory | ||||
| Launch mass | 366.87 kg[1] | ||||
| Dimensions | 1.52 m × 2.51 m (5.0 ft × 8.2 ft) | ||||
| Power | 200 W | ||||
| Start of mission | |||||
| Launch date | February 17, 1965, 17:05:00 UTC[1] | ||||
| Rocket | Atlas LV-3 Agena-B 196D/AA13 | ||||
| Launch site | Cape Canaveral LC-12 | ||||
| Lunar impactor | |||||
| Impact date | February 20, 1965, 09:57:36.756 UTC | ||||
| Impact site | 2°38′16″N 24°47′17″E / 02.6377°N 24.7881°E (Mare Tranquillitatis) | ||||
| |||||
Ranger 8 was a lunar probe in the Ranger program, a robotic spacecraft series launched by NASA in the early-to-mid-1960s to obtain the first close-up images of the Moon's surface. These pictures helped select landing sites for Apollo missions and were used for scientific study.[2] During its 1965 mission, Ranger 8 transmitted 7,137 lunar surface photographs before it crashed into the Moon as planned. This was the second successful mission in the Ranger series, following Ranger 7. Ranger 8's design and purpose were very similar to those of Ranger 7. It had six television vidicon cameras: two full-scan and four partial-scan. Its sole purpose was to document the Moon's surface.[3]
- ^ a b "Ranger 8". NASA's Solar System Exploration website. Retrieved December 1, 2022.
- ^ Green, Nick (2013). "Ranger 8 Information". New York: About.com. Archived from the original on May 11, 2013. Retrieved July 31, 2013.
- ^ "Ranger 8". National Space Science Data Center. Retrieved July 31, 2013.