Template:Jcon/sandbox

This is the template sandbox page for Template:Jcon (diff).
See also the companion subpage for test cases.

Template documentation[view] [edit] [history] [purge]

This template uses Lua:

Module:Jcon (sandbox)

Jcon (Junction Ontario) is used to display information about junctions in Ontario. The template is similar to {{jct}}, but with some added Ontario-relevant functionality not available in that template. The template is designed to represent Ontario highways and numbered county and regional roads.

The template can display concurrent roads in the same system (or a different one using |contype=) with use of |con=,|con2=, etc. The template can also be used to display the shield of a road by specifying |shield=y. This can be used when a road continues as another road or when this template is used in a list of routes.

Usage

{{jcon|<type>|<number>|<name>|dir=|shield=|sign=|tch=|city=|city2=|...|con=|condir=|contype=|con2=|condir2=|contype2=|...|to=|todir=|totype=|to2=|todir2=|totype2=|...|toname=|via=|viadir=|viatype=|via2=|viadir2=|viatype2=|...|vianame=|nosh=|notext=|nolink=|ot=|fulltext=|namefirst=|size=|showred=|picaft=}}

Parameters

Route information

|1= - The type of the route. If the road is a provincial highway, enter Hwy or Highway. If the road is a numbered county route enter the county/region name without "Region", "County" etc. or an abbreviation. MTO signs like airport or bus are supported. All supported types are at #Supported types and new ones can be added at Module:Jcon/data.
|2= - The number of the route or the name if |1= refers to a sign.
|3= - The name of the road if it is different from its numbered designation.
|dir= - If a junction only gives access to a road in a certain direction, enter that direction here, preferably as one of the cardinal directions (north, south, east, west).

Output type

|shield= - Set to a truthy value to Set to a truthy value to generate reassurance markers () instead of junction crowns (). Use when a route continues as another route or when this template is used in a list of routes.
|sign= - The name of an MTO sign to add to the shield output. See the signs listed at #Supported types for options.
|tch= - Set to a truthy value to add the shield and link for the Trans-Canada Highway.

Control cities

|city= / |town= - The name of the control city on the sign at the intersection. This is automatically wikilinked.
- |city= / |town= - Additional control cities where is a number starting from 2.

Concurrencies

Concurrency parameters follow the same format as the parameters listed in #Route information. When a concurrency type is not specified, the type of the first route is used.

|con= - The number of the currency. The number entered should be higher than the one entered for |2=.
- |con= - Additional concurrencies where is a number starting from 2. Concurrencies should be in ascending order.
|condir= - The direction of the concurrency.
- |condir= - The direction of additional concurrencies where is a number starting from 2.
|contype= - The type of the concurrency, defaults to the type of the first route. Since King's Highways supersede county routes, concurrencies only exist within the same system, but contype can still be used for roads that cross country boundaries.
- |contype= - The type of the th (additional) concurrency, defaults to the type of the first route.

To

To parameters follow the same format as the parameters listed in #Route information. When a type is not specified, the type of the first normal route is used.

|to= - The number of the to route. Appears like Highway 7 to Highway 23.
- |to= - Additional to routes/concurrencies where is a number starting from 2. Routes should be in ascending order.
|toname= - The name of the to route.
|todir= - The direction of the to route.
- |todir= - The direction of additional to routes where is a number starting from 2.
|totype= - The type of the to route, defaults to the type of the first route.
- |totype= - The type of the th (additional) to route, defaults to the type of the first route.

Via

Via parameters follow the same format as the parameters listed in #Route information. When a type is not specified, the type of the first normal route is used.

|via= - The number of the via route. Appears like Via Highway 401 via Highway 416. Used most commonly for 400-series highways.
- |via= - Additional via routes/concurrencies where is a number starting from 2. Routes should be in ascending order.
|vianame= - The name of the via route.
|viadir= - The direction of the via route.
- |viadir= - The direction of additional via routes where is a number starting from 2.
|viatype= - The type of the via route, defaults to the type of the first route.
- |viatype= - The type of the th (additional) via route, defaults to the type of the first route.

Appearance

|nosh= - Set to a truthy value to not display the shield. This is useful for prose, where icons are considered intrusive and not permitted.
|notext= - Set to a truthy value to not show the route name/only show the shield.
|nolink= - Set to a truthy value to prevent the road name from being linked.
|ot= - Set to a truthy value to hide the shield and remove the link, resulting in plain text.
|fulltext= - Set to a truthy value to show the full link name.
|namefirst= - Swap the route name and the name given by |3=, |toname=, and |vianame=. Like what {{jctname}} does for {{jct}}.
|size= - Sets the size of the shields. On the odd occasion, a larger size may be useful or required. For example, the template can be used as the value of the |browse_route= parameter of to display a larger version of a county road sign. The default is 20px.
|showred= - Set to a truthy value to show redlinks.
|picaft= - Set to a truthy value to move the shields to the end of the output.

Examples

Code	Result
`{{Jcon\|Simcoe\|42}}`	County Road 42
`{{Jcon\|York\|68\|Markham Road}}`	Regional Road 68 (Markham Road)
`{{Jcon\|york\|68\|Markham Road\|shield=y}}`	Regional Road 68 (Markham Road)
`{{Jcon\|Hwy\|7\|con=12\|Baldwin Street}}`	Highway 7 / Highway 12 (Baldwin Street)
`{{Jcon\|Hwy\|7\|con=12\|Baldwin Street\|shield=y}}`	Highway 7 / Highway 12 (Baldwin Street)
`{{Jcon\|Peel\|7\|con=18\|contype=Dufferin}}`	Regional Road 7 / County Road 18
`{{Jcon\|Highway\|35\|nosh=y}}`	Highway 35
`{{Jcon\|Toll\|407\|dir=east}}`	Highway 407 east
`{{Jcon\|Toll\|407ETR\|dir=west}}`	407 ETR west
`{{Jcon\|Toronto\|DVP}}`	Don Valley Parkway
`{{Jcon\|Ottawa\|11\|Moodie Drive\|nosh=y\|nolink=y}}`	Road 11 (Moodie Drive)
`{{Jcon\|Hwy\|QEW\|size=40px\|notext=y}}`
`{{Jcon\|Durham\|23\|ot=y\|fulltext=y}}`	Durham Regional Road 23
`{{Jcon\|Hwy\|401\|nosh=y\|town=Ajax}}`	Highway 401 – Ajax
`{{Jcon\|Hwy\|6\|con=21\|con2=26\|town=Collingwood\|city2=Owen Sound}}`	Highway 6 / Highway 21 / Highway 26 – Collingwood, Owen Sound
`{{Jcon\|Hwy\|6\|con=21\|con2=26\|town=Collingwood\|picaft=y}}`	Highway 6 / Highway 21 / Highway 26 – Collingwood
`{{Jcon\|Highway\|17\|tch=y}}`	Highway 17 / TCH
`{{Jcon\|Hwy\|11\|sign=bus}}`	Highway 11
`{{Jcon\|Airport\|[[Pearson Airport\|Pearson]]}}`	Pearson
`{{Jcon\|Hwy\|to=12}}`	To Highway 12
`{{Jcon\|Hwy\|7\|to=23}}`	Highway 7 to Highway 23
`{{Jcon\|Hwy\|401\|dir=east\|via=409}}`	Via Highway 401 east via Highway 409

Differences with Jct and Jctname

Feature differences

Functions in an Ontario context
Reassurance markers using |shield=y
Support for 400-series "Via" signage
Reuses the first road type for concurrencies etc.
Nameless parameter for street names
Case-insensitive types

Feature demos

Reassurance markers

{{Jcon|Simcoe|42|shield=y}} → County Road 42
N/A

400-series "Via"

{{Jcon|Hwy|401|via=409}} → Via Highway 401 via Highway 409
N/A

Same type concurrencies

{{Jcon|Hwy|6|con=21|con2=26}} → Highway 6 / Highway 21 / Highway 26

{{Jct|province=ON|Hwy|6|Hwy|21|Hwy|26}} → Highway 6 / Highway 21 / Highway 26

Street names nameless parameter

{{Jcon|Simcoe|42|Markham Road}} → County Road 42 (Markham Road)

{{Jct|province=ON|Simcoe|42|name1=Markham Road}} → County Road 42 (Markham Road)

Parameter differences

Mixed jurisdiction concurrencies

{{Jcon|Peel|7|con=18|contype=Dufferin}} → Regional Road 7 / County Road 18

{{Jct|province=ON|Peel|7|Dufferin|18}} → Regional Road 7 / County Road 18

To routes

{{Jcon|Hwy|7|to=23}} → Highway 7 to Highway 23

{{Jct|province=ON|Hwy|7|Hwy|23|to2=y}} → Highway 7 to Highway 23

MTO signs

{{Jcon|Hwy|409|sign=airport}} → Highway 409

{{Jct|province=ON|Hwy|409|extra=airport}} → Highway 409

Supported types

Note: All inputs are converted to lowercase by the template and "Region of", "County Road", etc. are striped from the input.

Type	Route name
`A`	`Autoroute %route%`
`ABSK`	`Highway %route%`
`BCAB`	`Highway %route%`
`BCAB 1960`	`Highway %route%`
`BCH` `Brant County Highway`	`Brant County Highway %route%`
`Both`
`Brant`	`Brant County Road %route%`
`Bruce`	`Bruce County Road %route%`
`C Frontenac` `Central Frontenac`	`Central Frontenac Township Road %route%`
`Carleton`	`Carleton County Road %route%`
`CH`	`%county% County Highway %route%`
`Chatham Kent` `Chatham-Kent` `CK`	`Chatham-Kent Municipal Road %route%`
`CKL` `Kawartha Lake` `Kawartha Lakes` `KL` `klinfo` `KLR`	`Kawartha Lakes Road %route%`
`Cornwall`	`Cornwall Municipal Road %route%`
`County` `CR`	`%county% County Road %route%`
`CQW` `Quinte West` `QW` `qwinfo`	`Quinte West Municipal Road %route%`
`District` `DR`	`%county% District Road %route%`
`DRH` `Durham Regional Highway`	`Durham Regional Highway %route%`
`Dufferin`	`Dufferin County Road %route%`
`Durham`	`Durham Regional Road %route%`
`Elgin`	`Elgin County Road %route%`
`Essex`	`Essex County Road %route%`
`ETR`
`Expressway`	`%route%`
`FI` `Frontenac Islands`	`Frontenac Islands Township Road %route%`
`Frontenac`	`Frontenac County Road %route%`
`Fwy`	`Highway %route%`
`Greater Sudbury` `GS` `SB` `Sudbury`	`Greater Sudbury Municipal Road %route%`
`Grey`	`Grey County Road %route%`
`Haldimand`	`Haldimand County Road %route%`
`Haldimand County Highway` `HCH`	`Haldimand County Highway %route%`
`Haliburton` `HH`	`Haliburton County Road %route%`
`Halton`	`Halton Regional Road %route%`
`Hamilton`	`Hamilton City Road %route%`
`Hamilton Regional Road` `HRR`	`Hamilton Regional Road %route%`
`Hastings`	`Hastings County Road %route%`
`Highway` `Hwy` `ON`	`Highway %route%`
`Huron`	`Huron County Road %route%`
`I`	`Interstate %route%`
`Kingston`	`Kingston Road %route%`
`LA` `Lennox and Addington`	`Lennox and Addington County Road %route%`
`Lambton`	`Lambton County Road %route%`
`Lanark`	`Lanark County Road %route%`
`Leeds and Grenville` `LG`	`Leeds and Grenville County Road %route%`
`Middlesex`	`Middlesex County Road %route%`
`MR` `Municipal`	`%county% Municipal Road %route%`
`Muskoka`	`Muskoka District Road %route%`
`N Dumfries` `North Dumfries`	`North Dumfries Township Road %route%`
`N Frontenac` `North Frontenac`	`North Frontenac Township Road %route%`
`NCC`	`%route%`
`NCH` `Norfolk County Highway`	`Norfolk County Highway %route%`
`Niagara`	`Niagara Regional Road %route%`
`Norfolk`	`Norfolk County Road %route%`
`Northumberland`	`Northumberland County Road %route%`
`NY`	`New York State Route %route%`
`OC` `Ottawa-Carleton`	`Ottawa–Carleton Regional Road %route%`
`ON 1960`	`King's Highway %route%`
`Ottawa`	`Ottawa Road %route%`
`Oxford`	`Oxford County Road %route%`
`Parkway`	`%route% Parkway`
`PB` `Peterborough`	`Peterborough County Road %route%`
`PCL` `Perth` `Perth County Line`	`Perth County Line %route%`
`PEC` `Prince Edward`	`Prince Edward County Road %route%`
`Peel`	`Peel Regional Road %route%`
`PR` `Prescott and Russell`	`Prescott and Russell County Road %route%`
`QEW`	`Queen Elizabeth Way`
`Regional` `RR`	`%county% Regional Road %route%`
`Renfrew`	`Renfrew County Road %route%`
`RH`	`%county% Regional Highway %route%`
`road`	`%route%`
`S Frontenac` `South Frontenac`	`South Frontenac Township Road %route%`
`SDG` `Stormont Dundas and Glengarry` `Stormont, Dundas and Glengarry` `Stormont, Dundas, Glengarry`	`Stormont, Dundas and Glengarry County Road %route%`
`Sec` `Secondary`	`Highway %route%`
`Shield`	`Highway %route%`
`Simcoe`	`Simcoe County Road %route%`
`SKMB`	`Highway %route%`
`TCH`	`Trans-Canada Highway`
`Ter` `Tertiary`	`Highway %route%`
`TO` `Tor` `Toronto`	`%route%`
`Toll`	`Highway %route%`
`Toll Shield` `TS`	`Highway %route%`
`Tour`	`Great Lakes Circle Tour`
`Tyendinaga`	`Tyendinaga Township Road %route%`
`Waterloo`	`Waterloo Regional Road %route%`
`Wellesley`	`Wellesley Township Road %route%`
`Wellington`	`Wellington County Road %route%`
`Wilmot`	`Wilmot Township Road %route%`
`Wollaston`	`Wollaston Township Road %route%`
`Woolwich`	`Woolwich Township Road %route%`
`York` `YR`	`York Regional Road %route%`
train
bus
ferry
hospital
tch
train station
airport

Table produced by Module:Jcon/documentation with data from Module:Road data/strings/CAN/ON (edit).

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Jcon in articles based on its TemplateData.

TemplateData for Jcon

Template used to represent Ontario highways and numbered county roads.

Template parameters[Edit template data]
This template prefers inline formatting of parameters.
Parameter		Description	Type	Status
Route type	`1`	The type of the road. If the road is a provincial highway, enter "Hwy" or "Highway". If the road is a numbered county route enter the county/region name without "Region"/"County" etc. or an abbreviation. MTO signs like airport or bus are supported. All supported types are listed on the documentation page.	String	required
Route number	`2`	The number of the route.	Number	suggested
Road name	`3`	The name of the road if it is different from its numbered designation.	String	optional
Shield	`shield`	Set to a truthy value to generate reassurance markers instead of junction crowns. Use when a route continues as another route or when this template is used in a list of routes.	Boolean	optional
Sign	`sign`	The name of an MTO sign to add to the shield output. Example airport	String	optional
Trans-Canada Highway	`tch`	Set to a truthy value to add the shield and link for the Trans-Canada Highway.	Boolean	optional
Direction	`dir`	If a junction only gives access to a road in a certain direction, enter that direction here, preferably as one of the cardinal directions (north, south, east, west).	String	optional
Control city	`city` `town`	The name of the control city on the sign at the intersection. This is automatically wikilinked.	String	optional
Control city 2	`city2` `town2`	Name of the second control city. This is automatically wikilinked.	String	optional
Control city 3	`city3` `town3`	Name of the second control city. This is automatically wikilinked.	String	optional
Concurrency	`con`	Route number of the first concurrency. The number entered under the con parameter should be the higher of the two.	Number	optional
Concurrency 2	`con2`	Route number of the second concurrency. The number entered under the con2 parameter should be the higher of the three.	Number	optional
Concurrency 3	`con3`	Route number of the third concurrency. The number entered under the con3 parameter should be the higher of the four.	Number	optional
Concurrency direction	`condir`	Same as \|dir=, but for the first concurrency.	String	optional
Concurrency 2 direction	`condir2`	Same as \|dir=, but for the second concurrency.	String	optional
Concurrency 3 direction	`condir3`	Same as \|dir=, but for the third concurrency.	String	optional
Concurrency type	`contype`	The road type of the first concurrency. Since King's Highways supersede county routes, concurrencies only exist within the same system, but contype can still be used for roads that cross country boundaries.	String	optional
Concurrency 2 type	`contype2`	The road type of the second concurrency. Since King's Highways supersede county routes, concurrencies only exist within the same system, but contype can still be used for roads that cross country boundaries.	String	optional
Concurrency 3 type	`contype3`	The road type of the third concurrency. Since King's Highways supersede county routes, concurrencies only exist within the same system, but contype can still be used for roads that cross country boundaries.	String	optional
To	`to`	Route number of the first to route.	Number	optional
To 2	`to2`	Route number of a second to route/concurrency. Routes should be in ascending order.	Number	optional
To 3	`to3`	Route number of a third to route/concurrency. Routes should be in ascending order.	Number	optional
To name	`toname`	The name of the to route.	String	optional
To direction	`todir`	Same as \|dir=, but for the first to route.	String	optional
To 2 direction	`todir2`	Same as \|dir=, but for the second to route.	String	optional
To 3 direction	`todir3`	Same as \|dir=, but for the third to route.	String	optional
To type	`totype`	The road type of the first to route.	String	optional
To 2 type	`totype2`	The road type of the second to route.	String	optional
To 3 type	`totype3`	The road type of the third to route.	String	optional
Via	`via`	Route number of the first via route. Used most commonly for 400-series highways.	Number	optional
Via name	`vianame`	The name of the via route.	String	optional
Via 2	`via2`	Route number of a second via route/concurrency. Routes should be in ascending order.	Number	optional
Via 3	`via3`	Route number of a third via route/concurrency. Routes should be in ascending order.	Number	optional
Via direction	`viadir`	Same as \|dir=, but for the first via route.	String	optional
Via 2 direction	`viadir2`	Same as \|dir=, but for the second via route.	String	optional
Via 3 direction	`viadir3`	Same as \|dir=, but for the third via route.	String	optional
Via type	`viatype`	The road type of the first via route.	String	optional
Via 2 type	`viatype2`	The road type of the second via route.	String	optional
Via 3 type	`viatype3`	The road type of the third via route.	String	optional
No shield	`nosh`	Set to a truthy value to not display the shield. This is useful for prose, where icons are considered intrusive and not permitted.	Boolean	optional
No text	`notext`	Set to a truthy value to not show the route name/only show the shield.	Boolean	optional
No link	`nolink`	Set to a truthy value to prevent the road name from being linked.	Boolean	optional
Only text	`ot`	Set to a truthy value to hide the shield and remove the link, resulting in plain text.	Boolean	optional
Full text	`fulltext`	Set to a truthy value to show the full link name.	Boolean	optional
Name first	`namefirst`	Swap the road name and the route name.	Boolean	optional
Shield size	`size`	Sets the size of the shields. On the odd occasion, a larger size may be useful or required. For example, the template can be used as the value of the \|browse_route= parameter of {{Infobox road}} to display a larger version of a county road sign. The default is 20px.	String	optional
Show redlinks	`showred`	Set to a truthy value to show redlinks.	Boolean	optional
Picture after	`picaft`	Set to a truthy value to move the shields to the end of the output.	Boolean	optional