Tokyo Metro 10000 series

Tokyo Metro 10000 series
A Yūrakuchō and Fukutoshin Lines 10000 series train
In service2006–present
ManufacturerHitachi
Family nameA-train
ReplacedTokyo Metro 7000 series
Constructed2006–2010
Entered service1 September 2006
Number built360 vehicles (36 sets)
Number in service360 vehicles (36 sets)
Formation10 cars per trainset
Fleet numbers01–36
Capacity1,518 passengers; 522 seated (10-car configuration)
OperatorsTokyo Metro
Lines served
Specifications
Car body constructionAluminium
Car length
  • 20,470 mm (67 ft 2 in) (end cars)
  • 20,000 mm (65 ft 7 in) (intermediate cars)
Width2,800 mm (9 ft 2 in)
Height4,045 mm (13 ft 3.3 in)
Doors4 pairs per side
Maximum speed
  • 80 km/h (50 mph) (Tokyo Metro lines)
  • 105 km/h (65 mph) (Seibu lines)
  • 100 km/h (62 mph) (Tobu lines)
  • 120 km/h (75 mph) (design)
Weight294.8 t (290.1 long tons; 325.0 short tons)
Traction systemMitsubishi IGBTVVVF inverter PG sensorless control
MAP-178-15V150, MAP-174-15V151
Traction motors20 × MM-I11A2 165 kW (221 hp) 3-phase AC induction motor
Power output3.3 MW (4,425 hp)
Acceleration3.3 km/(h⋅s) (2.1 mph/s)
Deceleration3.5 km/(h⋅s) (2.2 mph/s) (service)
4.5 km/(h⋅s) (2.8 mph/s) (emergency)
Electric system(s)1,500 V DC overhead catenary
Current collector(s)Pantograph
Bogies
  • FS-777 (motored)[1]
  • FS-777T (trailer)[1]
  • FS-777CT (end cars)[1]
Braking system(s)Electronically controlled pneumatic brakes with regenerative braking, pure electric braking
Safety system(s)New CS-ATC, ATO, ATC-P, T-DATC, Tobu ATS, Seibu ATS
Coupling systemShibata
Track gauge1,067 mm (3 ft 6 in)

The Tokyo Metro 10000 series (東京メトロ10000系, Tōkyō Metoro 10000-kei) is an electric multiple unit (EMU) train type operated on the Yurakucho and Fukutoshin subway lines of Tokyo Metro in Japan since 2006.

  1. ^ a b c Cite error: The named reference railfan545 was invoked but never defined (see the help page).