Toxic equivalency factor

Toxic equivalency factor (TEF) expresses the toxicity of dioxins, furans and PCBs in terms of the most toxic form of dioxin, 2,3,7,8-TCDD.[1] The toxicity of the individual congeners may vary by orders of magnitude.

With the TEFs, the toxicity of a mixture of dioxins and dioxin-like compounds can be expressed in a single number – the toxic equivalency (TEQ). It is a single figure resulting from the product of the concentration and individual TEF values of each congener.[1]

The TEF/TEQ concept has been developed to facilitate risk assessment and regulatory control. While the initial and current set of TEFs only apply to dioxins and dioxin-like chemicals (DLCs), the concept can theoretically be applied to any group of chemicals satisfying the extensive similarity criteria used with dioxins, primarily that the main mechanism of action is shared across the group. Thus far, only the DLCs have had such a high degree of evidence of toxicological similarity.[2]

There have been several systems over the years in operation, such as the International Toxic Equivalents for dioxins and furans only, represented as I-TEQDF, as well as several country-specific TEFs. The present World Health Organization scheme, represented as WHO-TEQDFP, which includes PCBs is now universally accepted.[1]

  1. ^ a b c Van den Berg M, Birnbaum LS, Denison M, De Vito M, Farland W, Feeley F, Fiedler H, Hakansson H, Hanberg A, Haws L, Rose M, Safe S, Schrenk D, Tohyama C, Tritscher A, Tuomisto J, Tysklind M, Walker N, Peterson RE. 2006. The 2005 World Health Organization reevaluation of human and mammalian toxic equivalency factors for dioxins and dioxin-like compounds, Toxicol. Sci. 93:223–241, doi:10.1093/toxsci/kfl055.
  2. ^ U.S. EPA. 2000. Supplementary Guidance for Conducting Health Risk Assessment of Chemical Mixtures. EPA/630/R-00/002. Washington, DC:Risk Assessment Forum.