Track gauge in Ireland

Track gauge
By transport mode
Tram Rapid transit Miniature Scale model
By size (list)
Minimum   Fifteen inch 381 mm (15 in)   Narrow   600 mm 600 mm (1 ft 11+5⁄8 in) Two foot 610 mm (2 ft) Two foot three inch 686 mm (2 ft 3 in)   750 mm 750 mm (2 ft 5+1⁄2 in) Bosnian gauge 760 mm (2 ft 5+15⁄16 in) Two foot six inch 762 mm (2 ft 6 in)   Swedish three foot 891 mm (2 ft 11+3⁄32 in) 900 mm 900 mm (2 ft 11+7⁄16 in) Three foot 914 mm (3 ft) Italian metre 950 mm (3 ft1+13⁄32 in)   Metre 1,000 mm (3 ft 3+3⁄8 in)   Three foot six inch 1,067 mm (3 ft 6 in)   Four foot 1,219 mm (4 ft)   Four foot six inch 1,372 mm (4 ft 6 in)   1432 mm 1,432 mm (4 ft 8+3⁄8 in)   Standard 1,435 mm (4 ft 8+1⁄2 in)   Broad   Italian broad gauge 1,445 mm (4 ft 8+7⁄8 in) Dresden gauge 1,450 mm (4 ft 9+3⁄32 in)   Leipzig gauge 1,458 mm (4 ft 9+13⁄32 in)   Toronto gauge 1,495 mm (4 ft 10+7⁄8 in)   1520 mm 1,520 mm (4 ft 11+27⁄32 in) Five foot 1,524 mm (5 ft)   Pennsylvania gauge 1,581 mm (5 ft 2+1⁄4 in) Pennsylvania gauge 1,588 mm (5 ft 2+1⁄2 in) Five foot three inch 1,600 mm (5 ft 3 in)   Baltimore gauge 1,638 mm (5 ft 4+1⁄2 in)   Iberian gauge 1,668 mm (5 ft 5+21⁄32 in) Five foot six inch 1,676 mm (5 ft 6 in)   Six foot 1,829 mm (6 ft)   Brunel 2,140 mm (7 ft 1⁄4 in)   Breitspurbahn 3,000 mm (9 ft 101⁄8 in)
Change of gauge
Break of gauge Dual gauge Conversion list Bogie exchange Variable gauge
By location
North America South America Europe Australia

The track gauge adopted by the mainline railways in Ireland is 1,600 mm (5 ft 3 in). This unusually broad track gauge is otherwise found only in Australia (where it was introduced by the Irish railway engineer F. W. Sheilds), in the states of Victoria, southern New South Wales (via some extensions of the Victorian rail network) and South Australia, as well as in Brazil.

The Grand Duchy of Baden State Railway used this gauge between 1840 and 1855, as did the Canterbury Provincial Railways in New Zealand, until conversion to the 1,067 mm (3 ft 6 in) gauge in the 1860s. The Launceston and Western Railway in Tasmania also used this gauge from 1871, until conversion to 1,067 mm (3 ft 6 in) gauge in 1888.