User:Nihiltres/Nav ImageMap is a useful MediaWiki extension that allows images to be clickable using nice, clean code. Since this extension hasn't always been active on the Wikimedia servers, we have a workaround template widely in use, {{click}}, which uses a nifty little hack to superimpose an invisible link over an image. This workaround doesn't work right in all contexts, making it a usability problem. It is still useful in some cases, however, since ImageMap does not support templates or template parameters. We should therefore convert all instances of {{click}} that can be converted.
I wrote a couple of scripts in AppleScript that take {{click}} input and output some virtually equivalent ImageMap code. They require three things to work: A computer running Mac OS X, the included application TextEdit, and a third-party scripting extension called TextCommands, freely available online. The scripts follow. The older, deprecated script is in a very messy state - I coded it and debugged it very quickly, more as a proof-of-concept than anything else, though it is functional. The second script is vastly preferable.
on run
----whatever works here... just get the input of one {{click}} to parameter *click*
set click to (display dialog "Give an input of a {{click}}" default answer "" default button 2)'s text returned
tell application "TextCommands"
set click to (search click for "| " replacing with "|")
set click to (search click for " |" replacing with "|")
set click to (search click for "}}" replacing with "|}}")
end tell
----
set imagepar to getparameter(click, "image")
set widthpar to getparameter(click, "width")
set heightpar to getparameter(click, "height")
------dimensions parser
if heightpar is not "" then
tell application "TextCommands"
set widthpar to (search widthpar for "p" replacing with "")
end tell
set dimensions to (widthpar & heightpar)
else
set dimensions to widthpar
end if
------
------create the image line
set imagebit to ("Image:" & imagepar & "|" & dimensions)
set titlepar to getparameter(click, "title")
if titlepar is not equal to "" then set imagebit to (imagebit & "|" & titlepar)
------
set linkpar to getparameter(click, "link")
------link line parser
if titlepar is not equal to "" then
set linkbit to ("default [[" & linkpar & "|" & titlepar & "]]")
else
set linkbit to ("default [[" & linkpar & "]]")
end if
------
--create as text in TextEdit
tell application "TextEdit"
activate
make new document with properties {text:"<imagemap>
" & imagebit & "
" & linkbit & "
desc none
</imagemap>"}
end tell
--
----warn if noncompliant
------check for template bits
if (imagebit & "|" & linkbit) contains "{{" then display dialog "This ImageMap syntax appears to contain templates or parameters, which is not supported by either the ImageMap extension or this conversion script." with icon caution buttons {"OK"} default button 1
------check for empty critical parameters
if (linkpar = "") or (imagepar = "") then display dialog "This ImageMap syntax appears to be missing either an image or a destination link, both of which are required." with icon caution buttons {"OK"} default button 1
----
end run
----
on getcontentfrom(content, container)
--This command requires *container* to be a list of two strings and *content* to be some text.
tell application "TextCommands"
if ((search content for ((escape pattern (item 1 of container)) & ".*?" & (escape pattern (item 2 of container))) with regex) as Unicode text) as Unicode text is not equal to "" then
set getcontentfrom_result to ¬
(text (((count (item 1 of container)) + 1) as number) through (((count ((search content for ((escape pattern (item 1 of container)) & ".*?" & (escape pattern (item 2 of container))) with regex) as Unicode text) as Unicode text)) - (count (item 2 of container)) as number) of ((search content for ((escape pattern (item 1 of container)) & ".*?" & (escape pattern (item 2 of container))) with regex) as Unicode text) as Unicode text)
else
set getcontentfrom_result to ""
end if
return getcontentfrom_result
end tell
end getcontentfrom
----
----
on getparameter(sometext, parameter)
if (getcontentfrom(sometext, {(parameter & "="), "|"})) is not equal to "" then
set theparamvalue to (getcontentfrom(sometext, {(parameter & "="), "|"}))
else
tell application "TextCommands"
if sometext contains (parameter & "=") then
if ((split sometext using (parameter & "=")) as string) is not equal to "" then
set theparamvalue to item 2 of (split sometext using (parameter & "="))
else
set theparamvalue to ""
display dialog (parameter & " failed.")
end if
else
set theparamvalue to ""
end if
end tell
end if
return theparamvalue
end getparameter
----
I recently decided to recode the tool to let it parse a whole page for all the {{click}}s at once. This version is somewhat cleaner, but it runs quite slowly - a limitation of the simplicity of AppleScript, though improved somewhat by simplification of some of the more inefficient commands. Feel free to suggest improvements to me. It also could use a better interface - pasting an entire page worth of wikicode into a single short line in a dialog box is unwieldy for all that it is workable. I may write a bot framework and get it to make edits semi-automatically, though for now it works fine just as an easy method, or a shortcut for pages with dozens of {{click}}s.
on run
--
set parseList to {}
set imageparreceived to false
set linkparreceived to false
set widthparreceived to false
set heightparreceived to false
set titleparreceived to false
set output to ""
----empty and normalize the starting values for each run...
--
set theText to (display dialog "Give me text" default answer "" default button 2)'s text returned
----doesn't matter how you get the text, just get it and make sure the method handles it properly as Unicode text.
--
tell application "TextCommands"
set midList to (split theText using "{{")
repeat with m from 1 to (count midList)
if item m of midList contains "}}" then
set subList to (split (item m of midList) using "}}")
repeat with n from 1 to (count subList)
set end of parseList to (item n of subList)
end repeat
else
set end of parseList to (item m of midList)
end if
end repeat
repeat with o from 1 to (count parseList)
if ((-1) ^ o) > 0 then
if (check (strip item o of parseList) matches "^(c|C)lick.*") is true then
set midList to (split item o of parseList using "|")
if (count midList) > 2 then
if (text 1 of (item (o + 1) of parseList)) is not "{" then
repeat with p from 2 to count midList
if (item p of midList) contains "=" then
set explodedParameter to (split item p of midList using "=" splitting first 1)
repeat with q from 1 to 2
set (item q of explodedParameter) to (strip (item q of explodedParameter))
end repeat
--below is a bouncing script to evaluate it if it's a valid parameter.
if (lowercase (item 1 of explodedParameter)) is equal to "image" then
if imageparreceived is false then
set imagepar to (item 2 of explodedParameter)
set imageparreceived to true
end if
else if (lowercase (item 1 of explodedParameter)) is equal to "link" then
if linkparreceived is false then
set linkpar to (decode HTML (item 2 of explodedParameter))
set linkparreceived to true
end if
else if (lowercase (item 1 of explodedParameter)) is equal to "width" then
if widthparreceived is false then
set widthpar to (item 2 of explodedParameter)
set widthparreceived to true
end if
else if (lowercase (item 1 of explodedParameter)) is equal to "height" then
if heightparreceived is false then
set heightpar to (item 2 of explodedParameter)
set heightparreceived to true
end if
else if (lowercase (item 1 of explodedParameter)) is equal to "title" then
if titleparreceived is false then
set titlepar to (item 2 of explodedParameter)
set titleparreceived to true
end if
else
--should return some sort of error
end if
end if
end repeat --of p
--------HERE WE HAVE PARAMETERS: ASSEMBLE THEM!
if (widthparreceived is true) and (linkparreceived is true) and (imageparreceived is true) then
--
if heightparreceived is true then
set dimensionsbit to (join {(strip widthpar removing "p" from throughout),heightpar})
else
set dimensionsbit to widthpar
end if
--
set imagebit to (join {"Image:", imagepar, "|", dimensionsbit})
if titleparreceived is true then
set imagebit to (join {imagebit, "|", titlepar})
set linkbit to (join {"default [[", linkpar, "|", titlepar, "]]"})
else
set linkbit to (join {"default [[", linkpar, "]]"})
end if
--
set theimagemap to (join {"<imagemap>
", imagebit, "
", linkbit, "
desc none
</imagemap>"})
set output to (join {(strip output from right end removing "{"),theimagemap})
--------
else
--should return some sort of error
end if --of enough-parameters check
else
--should return some sort of error
end if --of "includes {{{}}}?" check
else
--should return some sort of error
end if --of "is midlist count > 2?" check
else --of "is this a {{click}}" check
if o < (count parseList) then
set output to (join {output, item o of parseList, "}}"})
end if
end if --of "is this a {{click}}" check
else --of "is o even?" check
if o < (count parseList) then
set output to (join {output, item o of parseList, "{{"})
else
set output to (join {output, item o of parseList})
end if
end if --of "is o even?" check
set imageparreceived to false
set linkparreceived to false
set widthparreceived to false
set heightparreceived to false
set titleparreceived to false
--reset the receivers for the next ImageMap on the page
----
end repeat -- of o
end tell
--
tell application "TextEdit"
activate
make new document with properties {text:output}
end tell
--doesn't matter how you return it, as long as you do...
--
end run