XTX

This article is about the computer standard. For the foreign currency trader, see XTX Markets. For the gender identity, see XtX (gender). For the graphics card, see Radeon RX 7000 series.

XTX is a computer-on-module (COM) standard for x86-based embedded devices. XTX adds PCI-Express, SATA, and LPC capabilities. The standard was promulgated by Advantech Corporation, Ampro,[1] and Congatec.

ETX XTX COM Express (Type 2)
Dimensions 95 × 114 mm (3.7 × 4.5 in) 95 × 114 mm (3.7 × 4.5 in) (ETX footprint)
  • 110 × 155 mm (4.3 × 6.1 in) (extended)
  • 95 × 125 mm (3.7 × 4.9 in) (basic)
  • 95 × 95 mm (3.7 × 3.7 in) (compact)
  • 55 × 84 mm (2.2 × 3.3 in) (mini)
Legacy1 support Full legacy Legacy except ISA Legacy except ISA
PCI Express support - 4 Lanes up to 6 Lanes (basic)
PCI Express Graphic support - - up to 16 Lanes
Ethernet support 10/100 10/100 10/100/1000
IDE support 2 IDE, 2 SATA2 2 IDE, 4 SATA IDE, 4 SATA
LPC support - yes yes
USB support 4 USB 6 USB 8 USB
Audio support Line In/Out, Mic AC'97, Line In/Out, Mic AC'97, Line In/Out, Mic, AC'97 digital, HDA
Power 5V, 5VSB 5V, 5VSB 12V, 5VSB
Notes:
  1. "Legacy" is defined as the older PC peripherals and bus, such as ISA bus, RS-232 serial, IEEE 1284 parallel, floppy, and PS/2 keyboard & mouse.
  2. ETX 3.0 adds SATA via a topside connector on the board.
  1. ^ "Single Board Computers - Computer-on-Modules - Extreme Rugged, Rugged and Industrial - Ampro Computers". 12 February 2009. Archived from the original on 12 February 2009.{{cite web}}: CS1 maint: bot: original URL status unknown (link)